Flytgrunderna till AquaVillorna och AquaPirerna har en livslängd på minst 100 år.
Hus och samhällen på vatten
AquaVillan och AquaPirerna är konstruerade för att ligga i vatten, då dess ”skrov” eller flytgrund utgörs av en betonggrund som ger flytkraft. Flytgrunderna till AquaVillorna samt AquaPirerna är konstruerade och byggda enligt bronorm L100, ( L:et står för livslängd) vilket innebär att de klarar att ligga i vatten i över hundra år, utan att behöva torrsättas eller underhållas.
AquaVillas floating foundation is built in two versions – AquaComBi and AquaComBo.
AquaComBi (Bi = Bi-space) floating foundation AquaComBi has a secondary space on level 0 (the foundation) of 104 m² that can be used as storage, workshop, etc. as well as technical space together with built-in trim tanks for fine adjustment of the house's floating position. The ceiling height is 2.4 meters inside.
AquaComBo (Bo = Living space) is built in the same way as AquaComBi above, but there floor 0 is instead a living space together with built-in trim tanks for fine adjustment of the house's buoyancy. Floor 0 has a living area of 78 m², including trim tanks and technical space. The ceiling height is 2.4 meters inside.
259
The AquaComBi and -Bo floating foundations have a dead weight of 180-250 tons depending on design and size, with most of the weight coming from the bottom plate, which contributes to the best possible stability by having the weight located deepest, just like the keel of a sailboat.
Both designs are equipped with double hulls consisting of EPS cells, or trim tanks at the outer edge of the floating foundation, which in turn protect the foundation.
With the help of ballast water, the floating foundation can be trimmed so that it floats horizontally, after it has been decorated and furnished.
When one of our basic structures was inspected by the Cement and Concrete Institute almost 15 years ago, we received the assessment “this structure will not last 100 years, but it will last several hundred years.” It is difficult to get a better opinion.
AquaComBi
AquaComBo
1. The roof terrace is reinforced for a hot tub. It is also possible to mount solar panels on the roof/roof terrace.
2. Glass railings with a lintel/handrail in polished stainless steel.
3. Exterior wall construction from the outside to the inside of the wall:
- Composite board matt/semi-matt
in selected colours or wood panel - Perforated hat profiles, or wooden battens that provide a ventilated outer wall
- 10 mm magna-board alt. magnesium oxide board.
- CBZ 200 slotted Casabona profile and 197 mm EPS c/c 900 mm.
- Diffusion barrier.
- LZ-95 slotted and perforated profile or wooden joists for ducting and 95 mm mineral wool.
- 12 mm plywood or OSB board.
- 13 mm plasterboard.
- Painted interior wall surface.
4. Floor/interfloor with underfloor heating and oak parquet.
5. Wooden deck beams on walkways and terraces.
6. AquaComBi foundation with Bi space of 104 m2, including technical space.
7. AquaComBo foundation with living area of 78 m², including 20 m² technical room and auxiliary space.
8. Concrete foundation with embedded hoses that function as a collector of energy for the AquaEnergySystem together with a heat pump. The system supplies 75% of the house's heating needs.
9. Installation space for tap water and sewage.
AquaComBi
AquaComBo
